ZPM – Zeta Potential Mixer


About ZPM


Manufactured by Dryden Aqua, the ZPM is a cavitating static mixer used for the injection of coagulants and flocculants prior to media filtration by sand or Dryden Aqua AFM® (Activated Filter Media), for potable water as well as wastewater

It cavitates the water and increases the oxidation potential by over 100 mv with no addition of hemicals. The cavitation perfectly homogenizes the dosed chemical into the water. ZPM neutralizes the electrical charge (zeta potential) on the dissolved chemical & colloids, and therefore enhances the coagulation / flocculation process.

Main Benefits:

  • The only cavitating static mixer available in the market
  • Increase oxidation potential by up to 100 mv, therefore initiating disinfection without chemicals
  • Injection point for coagulants, flocculants, chlorine, ozone, or any gas
  • Improves coagulation/flocculation by at least 30%
  • 100% 316 grade stainless steel, or MDPE plastic & titanium for marine applications
  • Flanges directly into the pipework

Usage:

Homogenize injected coagulants and flocculants during contact filtration. Enhance water oxidation

Unique Features:

Cavitates the water and increases oxidation potential. Two injection points for liquids and gases; flanges directly into the pipework


ZPM Working Mechanism

 

nano bubble
« 1 of 4 »
 


ZPM Product Sheet

Parameter Required Value Before Treatment After Treatment
2 mWS
0.2 bar
3 mWS
0.3 bar
5 mWS
0.5 bar
30032 ZPM DN 32-2 / 1“ ET 140 mm / 0.35 kg 6 m3/h 7 m3/h 9.5 m3/h
30000 ZPM DN 40-3 / 1” ET 235 mm / 0.75 kg 5 m3/h 6.5 m3/h 8.5 m3/h
30001 ZPM DN 40-2 / 1½“ ET 195 mm / 0.75 kg 10 m3/h 12 m3/h 15 m3/h
30002 ZPM DN 50-3 / 2“ ET 300 mm / 1.2 kg 8.5 m3/h 13 m3/h 21.5 m3/h
30003 ZPM DN 50-2 / 2“ ET 240 mm / 1.2 kg 15 m3/h 23 m3/h 30 m3/h
30004 ZPM DN 65-3 / 2½“ ET 332 mm / 2.8 kg 20 m3/h 27 m3/h 40 m3/h
30005 ZPM DN 80-3 / 3” FL 419.6 mm / 11.2 kg 20 m3/h 30 m3/h 45 m3/h
30006 ZPM DN 100-3 / 4” FL 519.6 mm / 14.4 kg 50 m3/h 60 m3/h 85 m3/h
30013 ZPM DN 125-3 / 5“ FL 640 mm / 21.0 kg 70 m3/h 85 m3/h 115 m3/h
30007 ZPM DN 150-3 / 6” FL 759.6 mm / 26.8 kg 100 m3/h 125 m3/h 175 m3/h
30008 ZPM DN 200-3 / 8” FL 979.6 mm / 41.2 kg 175 m3/h 220 m3/h 290 m3/h
30009 ZPM DN 250-3 / 10” FL 1219.6 mm / 58.6 kg 260 m3/h 325 m3/h 420 m3/h
30010 ZPM DN 300-3 / 12” FL 1496 mm / 77.2 kg 385 m3/h 475 m3/h 500 m3/h

Other Products

Air Diffuser
Zeta Potential Mixer (ZPM)  is a static mixture manufactured from 316 grade stainless steel. Options in  mdpe plastic & titanium for marine applications, are also available. Read More
AFM - Gravity Flow Filter
Zeta Potential Mixer (ZPM)  is a static mixture manufactured from 316 grade stainless steel. Options in  mdpe plastic & titanium for marine applications, are also available.Read More
DGS - Dryden Glass Sand
Zeta Potential Mixer (ZPM)  is a static mixture manufactured from 316 grade stainless steel. Options in  mdpe plastic & titanium for marine applications, are also available.Read More
Easicup
Zeta Potential Mixer (ZPM)  is a static mixture manufactured from 316 grade stainless steel. Options in  mdpe plastic & titanium for marine applications, are also available.Read More


Danny McCray Jersey Yahoo Borse Gucci Michael Kors Outlet Orlando Florida The North Face Outlet Cheap Oakley Eyepatch 2 Sunglasses UGGs Boots Good For Snow Coach Purse Outlet Wholesale Jersey Tops Coach Outlet Online Shopping